The 6000 Cultivator is designed to
work in all soil, all residue, all crop, and all climatic conditions.
Imagine a cultivator designed to work in all soil,
all residue, all crop and all climatic conditions. What would it
look like? You don't have to wonder any longer, because the 6000
has arrived at your Hiniker dealer.
Middleworker point and shares permit high speed
operation without slabs and buried crops common to sweep cultivators.
Oscillating dual gauge wheels stay clean in muddy conditions while
maintaining pinpoint depth control. Convenient lever adjustments
allow for instant changes of all critical settings.
Ridging & Bedding
Flood irrigation, ridge planting,
bedding cotton, in fact whenever you need to move soil into
the row, the 6000 is your tool. Flip down the adjustable ridgers
and conform the soil to your exact specifications.
Cotton & Sugarbeet Options
TUNNEL
SHIELDS
CUTAWAY
DISCS
48"
tunnel shields offer complete protection for small sugarbeet
plants.
Quick
and easy pin adjustments permit 10 horizontal and 14 vertical
settings.
The Row Unit
1. Highest toolbar clearance in the industry.
2. Auto-reset mechanism for improved rock protection.
3. Exclusive lever (no wrench) adjustment of depth, coulter,
and down pressure.
4. Oscillating gauge wheels offer planter like depth control.
5. New chrome carbide point and double sided 1095 steel shares
outwear and outweed sweeps without troublesome slabbing.
Auto-reset
shanks provide
up to 10" of obstacle
clearance.
Four-step
down pressure adjustment lever for those tough, hard to penetrate
soil conditions.
6000 Fertilizer Application
"T"
shaped liquid fertilizer tubes place nutrients on each side of the
row for better plant uptake.
NH3
coil shanks for preplant or side-dress application.
Double
disc closers help to seal NH3 in heavy residue conditions.
Ensure Accurate Anhydrous Ammonia
Application With a Hiniker 8160 Control System
The compact, easy-to-use 8160 Control
Console will mount in any convenient location in the tractor
cab, and can also be used to monitor and control spray applications.
Anhydrous ammonia is one of the most efficient and widely used
sources of nitrogen for crop production. However, varying ground
speed, fluctuating temperatures, and vapor generated in the delivery
system can cause wide variations in application rates. These variations
cost money, either by reducing yields or by increasing fertilizer
expense.
The Hiniker 8160 Anhydrous Ammonia Control System ensures
accurate application by measuring and controlling NH3 in its liquid
state.
Ground speed and flow rate are constantly measured and relayed
to the control console. The Hiniker 8160 Control Console
uses this information to control application rates via a stainless
steel servo valve, eliminating the inaccuracies common in NH3 application.
The display
provides simultaneous readouts of two functions at once.
RATE-Gallons (liquid) or pounds (NH3) per acre.
SPEED-Ground speed in MPH.
VOLUME-Total amount applied.
AREA-Acres covered.
DISTANCE-Total distance traveled.
VOLUME per MINUTE-Gallons or pounds per minute.
ERR-Percent deviation from target rate.
6000
Shielding Options
Cutaway Hoe Shields
Get up-close weeding without the root-pruning of Cutaway
Discs.
Rotary Hoe wheels shield your crop and eliminate weeds.
Open center design works in tall or short crops.
Fully adjustable length, width, angle, and down pressure
settings.
Soil can be moved either into or away from the row.
In crops
as small as 3" the wheels are set aggressively with the
leading edge spaced as close to the row as necessary to remove
weeds but, WITHOUT the root pruning damage common to discs.
Moderate
ridging similar to that of a rolling cultivator is accomplished
by placing the wheels behind the middleworker and directing
the soil back into the row.
Specifications, features,
options, subject to change without notice by Hiniker Company
6000 Cultivator Specifications
Sweep Share Recommendations
First Cultivation
Later Cultivation
30" rows without cutaway
hoe shields
19/21 inch
17/19 inch
30" rows with cutaway
hoe shields
17 inch
17 inch
36/38" rows without
cutaway hoe shields
25/27 inch
21/25 inch
36/38" rows with cutaway
hoe shields
21 inch
21 inch
Item Number
Description
Transport Width
Approx. Weight
RIGID TOOLBAR
6002
4 Row 36/38 Inch
14"
2,223 lbs.
6003
6 Row 30
16' 6"
2,933 lbs.
6004
6 Row 38/38 Inch Rigid
20' 6"
3,023 lbs.
6024
6 Row 40
21' 6"
3,157 lbs.
6005
8 Row 30 Inch Rigid
21' 6"
3,815 lbs.
6006
8 Row 36/38 Inch Rigid
26' 10"
3,962 lbs.
6020
8 Row 36/40 Inch Rigid
28' 2"
4,143 lbs.
6022
10 Row 30 Inch Rigid
28' 2"
4,801 lbs.
FOLDING TOOLBAR
6007
8 Row 30 Inch Folding
12' 5"
4,356 lbs.
6008
8 Row 36/38 Inch Folding
15' 5"
4,557 lbs.
6021
8 Row 38/40 Inch Folding
15' 8"
4,559 lbs.
6023
10 Row 30 Inch Folding
17' 4"
5,374 lbs.
6009
12 Row 30 Inch Folding
17' 5"
6,032 lbs.
6025
10 Row 36/38 Inch Folding
21' 4"
6,485 lbs.
6010
12 Row 38/38 Inch Folding
21' 6"
7,143 lbs.
6011
16 Row 30 Inch Folding
22' 1"
8,540 lbs.
Low
Cost Strip-Till Conversion!
Get Strip-Till Attachments for Your Hiniker 6000 Cultivator
at a Fraction of the Cost of a Dedicated Machine
If you already have a Hiniker 6000 Cultivator, this is the perfect
opportunity to economically convert it into a state-of-the-art strip-till
machine. Best of all, this modification makes full use of the features
and performance your 6000 cultivator has been delivering all along
plus the benefits of strip-till. Realize the benefits of strip-till
at a cost lower than you might think!
Standard features and options, subject
to change without notice by Hiniker Company.
