Proven design provides unrestricted material flow
for fast and effective corn and cotton residue shredding. Available
in 15 and 20 ft. widths with three knife options, the Hiniker 1700
Series provides outstanding performance and maximum value.
High-speed 1700 RPM rotor
for thorough high-volume shredding
15 & 20 Ft. widths.
Three knife options: 3" cup,
reversible side slicer, or combination cup and side
slicer
Pull-type or 3-point mounted
hitches
1700
Components
1700 Features
High-vacuum 3 inch cup
knives ensure complete shredding, even in ridged fields.
Or, choose power-saving reversible dual side-slicer knives
where maximum suction isn’t required. The 1700 is
also available in a special ridge-till configuration which
places cup knives between the rows, and side-slicers over
the row.
235 HP rated Superior™ gearboxes are
standard on all machines. All units have
a standard overrunning clutch to protect
shredder and tractor.
Matched “C” section belts provide extra
power transfer reserve and minimum slippage. 8 inch diameter
spring loaded backwrap idler extends belt life and is easily
adjusted with just a screwdriver.
All rotor and drive shaft bearings are 2
inch diameter self-aligning. Bearings are triple lip sealed
and shielded. Rotor bearings are precision piloted for
long term stability and life.
Category 5 plus constant velocity (C.V.)
P.T.O.’s are standard on all trailing units.
This eliminates driveline knocking and the need to
disengage P.T.O. on short turns. An overrunning clutch
is included to protecttractor P.T.O. during shutdown.
1700
Flail Shredder Specifications
WIDTH
15
FT
20
FT
ROWS/SPACING
6/30"
8/30"
PTO
RPM
1000
1000
KNIVES
72
- 3" Cup or 72 Pair
Dual Side-Slicer
96
- 3" Cup or 96 Pair
Dual Side-Slicer
ROTOR
SPEED
1700
RPM
1700
RPM
KNIFE
TIP SPEED
10762
FPM
10762
FPM
HOOD
THICKNESS
1/4"
1/4"
ROTOR
DRIVE BELTS
(4) “C” Premium
(6) “C” Premium
ROTOR
BEARINGS
2" Bore
Piloted
2" Bore
Piloted
WHEELS
Four
15x5 KB
Four
15x5 KB
TIRES
7.60
x 15 6-ply Ribbed Tires
7.60
x 15 6-ply Ribbed Tires
HITCH
TYPE
Pull
or 3-Pt.
Pull
or 3-Pt.
PTO
SHAFT: Pull Type
Category
5 Plus Constant Velocity
1 3/8" or 1 3/4" with overrunning clutch
Category
5 Plus Constant Velocity
1 3/8" or 1 3/4" with overrunning clutch
PTO
SHAFT: 3-Point
1
3/8" or
1 3/4"
1
3/8" or
1 3/4"
Standard features and
options, subject to change without notice by Hiniker
Company.
