AR-2000 Shredder  
   
High-Performance Shredders with
Abrasion-Resistant Steel Hoods For Maximum Life.


The Hiniker AR-2000 Shredder is designed for thorough shredding of tougher residue resulting from today’s BT crops.

Based on the proven Hiniker 1700 Flail Shredder model, the AR-2000 includes advanced features for high productivity in the toughest corn and cotton shredding applications. Heavier knives and faster knife tip speeds cut through the tough stuff. Plus, abrasion-resistant AR-2000 steel hoods offer more than twice the life of standard hoods.
 
  • 1/4" AR200 abrasion resistant steel hood
  • High Speed 2000 RPM dynamically balanced
    10" diameter rotors
  • 5/16" Wear-Tuff® hard-surfaced knives, direct mounted (no D-rings)
  • Recutter Bar
  • Full length 5" x 7" front frame tube
  • Banded drive belts
  • 235 horsepower rated gearbox
 
 AR-2000 Components
 
 AR-2000 Features
 
 

Long life, 5/16" x 2 1/2 " hard-surfaced
reversible side slicer knives are standard
equipment. Direct mounting eliminates
“D-rings” for fewer wearing parts.


235 HP rated Superior™ gearboxes are
standard on all machines. All units have a
standard overrunning clutch to protect
shredder and tractor.

Banded belts deliver maximum horsepower without slippage. Spring loaded backwrap idler is easily adjusted with just a screwdriver.



Rotor bearings are 2 3/16" and 2 7/16" diameter self-aligning. Rotor bearings are precision piloted for long term stability and life.



Category 5 plus constant velocity (C.V.)
P.T.O.’s are standard on all trailing units. This eliminates driveline knocking and the need to disengage P.T.O. on short turns. An overrunning clutch is included to protect
tractor P.T.O. during shutdown.
 
 AR-2000 Shredder Specifications
Working Width
15 FT.
18 FT.
20 FT.
25 FT.
30 FT.
Rows/Spacing
Six 30"
Six 36"
Eight 30"
Ten 30"
Twelve 30"
Knives
72 pr. 5⁄16"
Wear-Tuff
Hard-Surfaced
Side-Slicer
72 pr. 5⁄16"
Wear-Tuff
Hard-Surfaced
Side-Slicer
96 pr. 5⁄16"
Wear-Tuff
Hard-Surfaced
Side-Slicer
128 pr. 5⁄16"
Wear-Tuff
Hard-Surfaced
Side-Slicer
160 pr. 5⁄16"
Wear-Tuff
Hard-Surfaced
Side-Slicer
Rotor Speed
2000 RPM
2000 RPM
2000 RPM
2000 RPM
2000 RPM
Knife Tip Speed
12714 FPM
12714 FPM
12714 FPM
12714 FPM
12714 FPM
Hood Thickness
1⁄4" Abrasion-
Resistant
AR200 Steel
1⁄4" Abrasion-
Resistant
AR200 Steel
1⁄4" Abrasion-
Resistant
AR200 Steel
1⁄4" Abrasion-
Resistant
AR200 Steel
1⁄4" Abrasion-
Resistant
AR200 Steel
Rotor Drive Belts
(2) 4-Groove
Banded
(2) 4-Groove
Banded
(2) 4-Groove
Banded
(2) 5-Groove
Banded
(2) 6-Groove
Banded
Rotor Bearings
2 3⁄16" Piloted
2 3⁄16" Piloted
2 3⁄16" Piloted
2 3⁄16" &
2 7⁄16"
Piloted
2 3⁄16" &
2 7⁄16"
Piloted
Wheels
(field operation)
Four 15 x 5 KB
Four 15 x 8 KB
Four 15 x 8 KB
Four 15 x 8 KB
Six 15 x 8 KB
Recommended
Tire Size
7.60 x 15
6-ply Rib
9.5L x 15
8-Ply Rib
9.5L x 15
8-Ply Rib
9.5L x 15
8-Ply Rib
9.5L x 15 8-Ply
Rib (standard)
Hitch Type
Pull-Type or 3-Pt.
Pull-Type or 3-Pt.
Pull-Type or 3-Pt.
Pull-Type or 3-Pt.
Pull-Type Only
PTO: Pull-Type
Category 5 Plus
Constant Velocity
1 3⁄8" or 1 3⁄4"
w/Overrunning
Clutch
Category 5 Plus
Constant Velocity
1 3⁄8" or 1 3⁄4"
w/Overrunning
Clutch
Category 5 Plus
Constant Velocity
1 3⁄8" or 1 3⁄4"
w/Overrunning
Clutch
Category 5 Plus
Constant Velocity
1 3⁄8" or 1 3⁄4"
w/Overrunning
Clutch
Category 5 Plus
Constant Velocity
1 3⁄8" or 1 3⁄4"
w/Overrunning
Clutch
PTO: 3-Point
Category 5
1 3⁄8" or 1 3⁄4"
w/Overrunning
Clutch
Category 5
1 3⁄8" or 1 3⁄4"
w/Overrunning
Clutch
Category 5
1 3⁄8" or 1 3⁄4"
w/Overrunning
Clutch
Category 5
1 3⁄8" or 1 3⁄4"
w/Overrunning
Clutch
N/A
Hydraulic
Cylinders & Hoses
(field operation)
One 3 x 8
(optional)
Two 2 1⁄2 x 8
(optional)
Two 2 1⁄2 x 8
(optional)
Two 2 1⁄2 x 8
(optional)
Two 3 x 8
(standard)
Safety Lighting
(optional)
(optional)
(optional)
(optional)
Standard
Skid Plate Kit
(optional)
(optional)
(optional)
(optional)
(optional)
Center Grass Divider
(optional)
(optional)
(optional)
(optional)
(optional)
End Transport
N/A
(optional)
(optional)
(optional)
Standard -
Includes Tires
and Cylinders
Wear-Tuff® is a trademark of Lund Coating Technologies, Inc.
Standard features and options, subject to change without notice by Hiniker Company.
 


 
Parts and Operator's Manuals Dealer Services Login Contact Hiniker Company Shows Shows