Hiniker Company Hiniker Snow & Ice Control
  • High-Performance Trip-Edge Poly
  • Heavy-Duty - Full-Trip Steel
  • Homeowner - Full Trip Poly
  • FOX - Skid Steer
  • Quick-Hitch Mounting System
  • Salt & Sand Spreaders

OHV Gas Engine
Conveyor Delivery Spreaders

6.5 & 8 ft. V-Box
Spread ice control materials quickly and easily with an efficient Hiniker Spreader. Private users and municipalities will benefit from the labor saving efficiency of the wide 25 ft. spread pattern. And a big 1.50 or 1.80 yard capacity means you'll spend your time productively, rather than constantly reloading.
   
Available in 6.5' & 8' hopper lengths
Corrosion-resistant stainless steel construction
New swing-away spinner chute for easier unloading and improved trailer hitch access
In-cab electric control of starter, throttle,
and clutch functions
Briggs & Stratton Intek AVS OHV engine
   
   
Optional easy-access hinged
hopper grids.
  Easily adjustable deflectors allow customized spread patterns
up to 25 ft. wide
  Swing-away spinner chute for easier unloading and improved trailer hitch access.

HOPPER: Formed and welded with continuous electric seam welding on the inside of hopper. The top edge is formed for rigidity. Side slope of 45 degrees allows smooth material flow. An adjustable self-locking feed gate with lever is standard.   GEAR CASE: The conveyor gear case has a
cast-iron housing. A precision-machined, hardened and ground steel worm gear drives a heavy-duty bronze spur gear. Both gears and bearing run in oil and are sealed from contaminants.
     
SPINNER: 14-gauge spinner chute assembly with
three external adjustable material deflectors provided to control spread pattern. Spinner disc is 12-inch
diameter with three welded fins. Spinner shaft of
3/4" diameter steel is mounted with sealed,
self-aligning bearing.
  CONVEYOR: Heavy-duty, self-cleaning, heat-treated
pintle chain with 24,000 lb. tensile strength. Two
screw-type adjusters are provided to take up
chain slack.
     
CONVEYOR DRIVE: Briggs & Stratton Intek OHV
air-cooled, single cylinder, four-cycle engine is
mounted on the rear of the spreader. The engine is equipped with an air cleaner, 12V battery, 12V electric starter, and electric throttle control. An in-cab control panel has engine start, shut-off, throttle, and clutch control functions. A hinged engine hood fully
encloses the engine. An electric clutch engages and disengages the drive sprocket. Power is transferred
to the gear case through roller chain and sprockets.
 
OPTIONAL EQUIPMENT
2 Piece Hinged Hopper Screens
Adjustable Inverted “V”
Ratchet Strap Tie Downs
High-mount Brake Light

Gas Spreader Specifications
MODEL
LEVEL CAPACITY
LENGTH
TOP WIDTH
MAX APPLICATION RATE
VIBRATOR
REMOVABLE HOPPER COVER TARP
HOPPER SCREENS
825
1.80 Cubic Yards
115" Overall/96" Hopper
50.5"
7.3 cu. ft./min N/A Optional Optional
625
1.50 Cubic Yards
97" Overall/78" Hopper
50.5"
7.3 cu. ft./min N/A Optional Optional

We reserve the right to amend these specifications at any time without notice. The only warranty applicable is our standard written warranty. We make no other warranty, expressed or implied.

 


© Copyright Hiniker Company 2005-

Dealer Services Login